-
Pathway
-
SOLABLADE
Open Area
-
SOLANOVA
Street & Car Park
-
SOLAVEGA
Feature & Uplight
-
SOLABATON
Shelter & Tunnel
-
SOLANERO
Perimeter
Solar Bollards as Waypoint Lights Along Rural Road in Wellington, SA
A long stretch of road in a section of Wellington in Murray Bridge was marked for Solar Bollards as an adjunct to the existing overhead street lighting.
Date Installed: 2021
Customer: Rural City Murray Bridge
Compliance: Waypoint lighting
Product: Solar Bollard Gen 2 (SBL2)
Order Code: SBL2-120ANW-0840BPA
Product Description: 11x Solar Bollard Gen 2, low power (120mA) for region with some shade, asymmetric LED arrangement, natural white (4,000mA), base-plate mounted, 1m installed height
Australian Made Solar Bollards: Reliable & Robust Solar Lighting for Rural Australia
Spacing between the existing lighting left long stretches without sufficient light; these gaps were filled with a base-plate mounted bollard. A low power model was used with some sections of the road being shaded by large trees or fence-line. For easier asset management, as well as installation efficiency, HIGHLUX commonly recommends customers opt for all bollards to be the same power model (as the lowest power specified), particularly when the lowest power model is only one step down from the standard (160mA). Where the lower power models such as the 80 and 40mA in some sections, but 120 and 160mA in others, keeping to the specification at each installation point is recommended.
